Das bequeme EVA-Deck ist mit verschiedenen Fußschlaufenpositionen versehen - von der anfängerfreundlichen, zentralen Einstellung bis zur sportlichen Freeride-Position nahe der Kanten. Die Funster werden mit unzerstörbaren, abnehmbaren Nose-Protektoren aus Fiberglass geliefert.
Der 160er hat einen sehr großen Einsatzbereich. Als Anfängerboard für Kinder und Leichtgewichte bis zum sportlichen Cruiser für fortgeschrittene Fahrer. Der 205er und 180er sind perfekte Anfängerbretter, die leicht und einfach wenden. Der komplett neue 240er ist deutlich länger als seine Brüder und bietet somit herausragende Richtungsstabilität. Durch die Breite über die gesamte Länge und die volleren Kanten reicht das Volumen aus, um selbst den schwersten Fahrern genügend Stabilität zu bieten.
Spezifikation:
JP Funster 160: Volumen 160L, Länge 258cm, Breite 80,0cm, Gewicht 11,8kg, Finne + Schwert Fun 34cm + Schwert.
JP Funster 180: Volumen 180L, Länge 258cm, Breite 91,0cm, Gewicht 13,0kg, Finne + Schwert Fun 34cm + Schwert.
JP Funster 205: Volumen 205L, Länge 260cm, Breite 101,0cm, Gewicht 14,6kg, Finne + Schwert Fun 34cm + Schwert.
JP Funster 240: Volumen 240L, Länge 282cm, Breite 101,0cm, Gewicht 15,8kg, Finne + Schwert Fun 34cm + Schwert.
Bei dem Funster 205 + 240 ist kein Boartdbag dabei und kann auch nicht geliefert werden, bitte dann nein auswählen bei
der bestellung und Sie sparen noch mal 56,64,- Euro.
Boardbag: Concept X . Sie können das Board auch ohne Bag bestellen dann sparen Sie 59,-€.
ASA SANDWICH Technologie mit EVA Dedeck, Nose-Protektor und Tragegriff an Bug
und Heck.
Since 2004 the first JP PRO Edition boards have a (SUPER) LIMITED FINISH. By reducing the amount of paint (sanding off) the weight is decreased. Consequently, the boards have a custom look with certain "imperfections" in the paint, thus the material below might shine through. Sometimes they even look as if repaired. This is also true for the Full Wood Sandwich boards as they now feature a LIMITED FINISH, too. You won't find two boards exactly the same. We believe this is worth it as the weight reduction is substantial and there's no loss of durability or strength.
STORAGE
Store your board in mild (neither hot, nor cold; not exposed to sunlight), dry places !
Winter storage: non-freezing (constantly above +5 C).
Note: Avoid storage in closed, damp conditions like in a wet boardbag! So, after windsurfing and safe transport put the board out of its bag and let both dry separately - otherwise your board will suffer from osmosis and blisters (bubbles) will show up on the boards surface. And your bag might start to smell.
AIR VALVE
We highly recommend to open the air valve screw when the board is not used. Reason: Due to high pressure differences the sandwich construction suffers from high stress and can delaminate long term from the board's core. This will result in a soft spot and start absorbing water. Pressure differences are caused by high temperature variations or other pressure variations from e.g. aero planes. Do not forget to close the air vent before going on the water!
NOSE PROTECTOR
Damages caused by impacts are not covered under JP-Australia's limited warranty. Therefore, JP-Australia highly recommends the use of a nose protector.
Especially recommended for novices and everybody, who wants to protect the board nose.
The universal protector: Made of EVA, the UNI NOSE PROTECTOR is a very light yet strong protection. It is easy to handle as it is simply glued onto the nose.
The set consists of 6 pieces: 2 side parts (one left and one right), and 4 connections in sizes Small, Medium, Large and "Wave Slate".
By combining the two sides with the appropriate connection at the front, noses of almost all standard board sizes and shapes can be covered efficiently.
This makes it an universal protector not only for JP boards but for most boards available on the market.
Please note: The uni nose protector is not made for the use on demo boards or in windsurfing centers, but for private use only!
Comfortable footstrap incl. 2 screws. Anti-twist system. Adjustable plastic plates for width adjustment.
ADJUSTABLE WIDTH
Adjustable in width not just in length. By simply turning the plastic plate by 180 degrees, the width of the foostraps can be reduced by 0.6cm (one plate) respectively 1.2cm (both plates). Great for slalom sailors who need a tight connection to the board and for youngsters or women with smaller feet.HOW TO ADAPT YOUR FOOTSTRAPS TO LARGE FEET OR SAILING WITH BOOTS
Adjust your Foot Strap SIZE for very large foot strap sizes, change the Anti Twist plate for the outside position - recommended for foot size 11 (US) / 10 (UK) and bigger.- remove the screw
- remove the Anti Twist plate
- insert the bottom part of the Anti Twist plate into the outside holes of the belt
- put the top plastic part back on the pins
- insert the screw
- adjust the size of the foot strap to fit your foot
HOW TO ADAPT YOUR FOOTSTRAPS TO SMALL FEET:
5 Steps for a NARROW Foot Strap:- remove the screw
- pull off the top plastic part
- rotate the top plastic part 180°
- put it back on the pins
- insert screw and mount the strap
3D FOOTSTRAP
Strap incl. 2 screws.
Comfortable padding, changeable to asymmetrical shape when the strap is not centered - very comfortable!
set-up
Symmetrical - for rear center strap
Asymmetrical - for front straps and rear straps on the rail
