JP Magic Ride FWS 2018

Das neue 112 wurde im Detail überarbeitet. Alle 7 Größen bieten jetzt eine fantastisch freie Gleitlage, die für ein sportliches und lebendiges Fahrgefühl sowie verbesserte Fahrleistung sorgt. Das 112 ist, wie der 119 und 130, ein agiler und sportlicher Freerider mit besserem Komfort sowie Halsen- und Gleiteigenschaften als herkömmliche Freeride Boards. Die 97 und 103 Modelle sind kippstabiler und einfacher zu Kontrollieren als die Freestyle Wave oder All Ride Modelle in vergleichbaren Größen. Dazu gleiten sie früher und verlangen weniger Technik und Einsatz vom Fahrer. Die Größen bis 130 sind sportlich schnelle Freerider mit einer breiten, kompakten Outline. Das 142 und 154 entsprechen speziell den Anforderungen und Bedürfnissen von Anfängern und Aufsteigern - sie sind
unglaublich fehlerverzeihend und komfortabel. Alle Modelle gleiten extrem früh für ihre Größe. Die Leistung und der Top Speed der zweiten Generation wurde nicht zuletzt durch das extrem einfache Handling beim Heizen verbessert - der Fahrer kann sich auf sich voll und ganz auf sich selbst konzentrieren anstatt auf das Board unter seinen Füßen. Die freie Gleitlage lässt das Board bequem und kontrolliert über das Wasser fliegen, das V und die Doppelkonkaven bügeln dabei jeden Chop aus.

Since 2004 the first JP PRO Edition boards have a (SUPER) LIMITED FINISH. By reducing the amount of paint (sanding off) the weight is decreased. Consequently, the boards have a custom look with certain "imperfections" in the paint, thus the material below might shine through. Sometimes they even look as if repaired. This is also true for the Full Wood Sandwich boards as they now feature a LIMITED FINISH, too. You won't find two boards exactly the same. We believe this is worth it as the weight reduction is substantial and there's no loss of durability or strength.

STORAGE

Store your board in mild (neither hot, nor cold; not exposed to sunlight), dry places !
Winter storage: non-freezing (constantly above +5 C).
Note: Avoid storage in closed, damp conditions like in a wet boardbag! So, after windsurfing and safe transport put the board out of its bag and let both dry separately - otherwise your board will suffer from osmosis and blisters (bubbles) will show up on the boards surface. And your bag might start to smell.

AIR VALVE

We highly recommend to open the air valve screw when the board is not used. Reason: Due to high pressure differences the sandwich construction suffers from high stress and can delaminate long term from the board's core. This will result in a soft spot and start absorbing water. Pressure differences are caused by high temperature variations or other pressure variations from e.g. aero planes. Do not forget to close the air vent before going on the water!

NOSE PROTECTOR

Damages caused by impacts are not covered under JP-Australia's limited warranty. Therefore, JP-Australia highly recommends the use of a nose protector.

Especially recommended for novices and everybody, who wants to protect the board nose.

The universal protector: Made of EVA, the UNI NOSE PROTECTOR is a very light yet strong protection. It is easy to handle as it is simply glued onto the nose.

The set consists of 6 pieces: 2 side parts (one left and one right), and 4 connections in sizes Small, Medium, Large and "Wave Slate".

By combining the two sides with the appropriate connection at the front, noses of almost all standard board sizes and shapes can be covered efficiently.

This makes it an universal protector not only for JP boards but for most boards available on the market.

Please note: The uni nose protector is not made for the use on demo boards or in windsurfing centers, but for private use only!

Comfortable footstrap incl. 2 screws. Anti-twist system. Adjustable plastic plates for width adjustment.

ADJUSTABLE WIDTH

HOW TO ADAPT YOUR FOOTSTRAPS TO LARGE FEET OR SAILING WITH BOOTS

• remove the screw
• remove the Anti Twist plate
• insert the bottom part of the Anti Twist plate into the outside holes of the belt
• put the top plastic part back on the pins
• insert the screw
• adjust the size of the foot strap to fit your foot

HOW TO ADAPT YOUR FOOTSTRAPS TO SMALL FEET:

• remove the screw
• pull off the top plastic part
• rotate the top plastic part 180°
• put it back on the pins
• insert screw and mount the strap

3D FOOTSTRAP

Strap incl. 2 screws.

Comfortable padding, changeable to asymmetrical shape when the strap is not centered - very comfortable!

set-up

Symmetrical - for rear center strap

Asymmetrical - for front straps and rear straps on the rail